Water Heater Repair – 3 Critical Issues

Water Heater Repair or Replace

If your water heater has stopped working, you may not need to replace it; you can simply repair it. Before you start, there are several things that you need to check first. These include The thermostat, gas valve, and burner. If these components fail to function correctly, you must contact a professional. After you’ve checked the thermostat, test the burner by running the hot water faucet.

Common problems with a water heater

You should call a professional if your water heater is making weird noises. Sediments may cause noises at the bottom of the tank or rust and scale buildup on the heating components. Usually, these noises are harmless and can be fixed by flushing out the tank. You may also notice that the water inside the tank has a rotten egg smell. This is usually caused by a rusted anode rod or excessive sediment.

FYI: Anode rod is a steel wire surrounded by either zinc, aluminum, or magnesium. It is usually 4 feet long and is screwed to the top of a water heater to protect it from rust. This process, known as electrolysis, takes place through the anode rod.

Another common water heater problem is that the water heater does not heat water well enough. The thermostat may not be at a high enough temperature, or the tank is too small. If this happens, you may need a more powerful heater. You should also check the dip tube, thermocouple, and pilot light.

Common causes of failure

Water heater failure is often caused by one of several problems. A major one is corrosion. As water passes through the tank, oxygen in the water causes the metal to corrode. Over time, this makes the tank thin and brittle. This can result in a leak or damage to the tank. The problem often starts as a small drip, but if left unrepaired, it will soon become a plumbing disaster.

Another common cause of water heater failure is mineral deposits in the pipes. These deposits can block water flow. If you notice that the water flow is restricted, check the inlet valve and ensure it is not partially closed. Other common causes of failure include clogged pipes and a faulty thermocouple. If these issues are not fixed, you should consult a professional plumber and see if you need a new water heater.

Cost of repair

If you have a water heater that has stopped working, you should know the cost of water heater repair. Several factors can affect the price of a water heater repair. First, you must identify the problem. A faulty valve or element can cost anywhere from $50 to $300. If you have a leak in the system, you may need to replace a pressure relief valve. If this does not fix the problem, you may need to replace the whole tank.

If the damage is severe, it could cost upwards of $1,300. If the repair is minor, it may only cost a few hundred dollars. Similarly, a faulty thermostat could cost anywhere from $150 to $300. But it is essential to know that this figure is an average and not the final price. The actual cost will depend on the problem and the plumber you select.

Hiring a professional

Hiring a professional for water heater repair is a great way to ensure you’re getting the best results possible. Not only will they use the best quality parts, but they’ll also check to see if there’s an underlying issue that needs to be repaired. This means that your water heater will last longer, and you’ll be able to count on the service you’ll get from a professional.

Hiring a professional for water heater repair is also a great way to save money. Professionals have the skills and knowledge to accurately pinpoint the defect and then resolve it with the highest efficiency. Hot water is essential for daily life, and when your water heater is not working efficiently, it can interrupt your daily routines and increase your expenses.

Maintenance of a water heater

To ensure that your water heater works as safely as possible, you should perform yearly maintenance. You should check the pressure relief valve to make sure that it’s working properly. This valve is located on the side or top of the water heater and opens when the pressure inside the tank gets too high. The valve is very important for your safety since too much pressure can cause the tank to explode. If the valve is not working correctly, the technician should turn off the power and cold water supply. He or she should then place a bucket underneath the pressure release valve. Then, he or she should lift the tab to check for the leak.

Another common issue with water heaters is that the temperature settings are wrong. This can cause your water to be too hot or too cold. If you notice a sudden temperature change, check the temperature setting and the thermostat. If the temperature is still too hot, the problem is likely with a heating element or thermostat. When you notice the temperature fluctuating, a faulty thermostat or heating element is the most common problem.

The best thing to do if you are not handy and don’t want to assume the risk of working on a water heater yourself is hiring a local plumber.

In conclusion, if your home’s water heater is in need of repair, it is best to call a professional. While it is possible to repair the water heater yourself, it is generally not recommended. This is because water heaters can be dangerous to work on and if not done correctly, can lead to further damage or even injury.

At Handy as a Pocket on a Shirt, LLC we handle all types of water heaters:

  • Tankless Water Heater
  • Convential Storage Tank Water Heater
  • Point of Use

Here in the Blue Springs, MO area some brands we have seen are:

  • Navien
  • Rinnai
  • Rheem
  • Kenmore
  • A.O. Smith
  • Envirotemp
  • Sure Comfort

Give us a call today so we can get the hot water flowing again 🙂

Leave a Comment